Jan 04 2012

BlackBerry PlayBook USB Host (connect a pendrive) – How to

Category: BlackBerry,Código,Playbook,pseudo-hacksguillem @ 2:02 AM

Well, I finally found time to write a little howto on using your pendrive with the PlayBook. I’m sorry about the delay on publishing this, but i was out of home for a few days and couldn’t find time to write the howto.

Well, let’s go to the howto. Things you will need:

– BlackBerry PlayBook

– Root access to your PlayBook (thanks to dingleberry :) )

– Female USB A to micro USB cable and a soldering iron OR USB OTG cable (for example this one will work: Micro USB OTG Cable)

– A pendrive

Now i will try to make instructions as short and clear as possible. Just let me know if something is unclear. I would also like to let you know that i have only tested this on a 1.8.xxx PlayBook version, so results on OS2 are unknown (i haven’t got access to a PlayBook with OS2 and i’m not wishing to upgrade mine at the moment). Please keep this in mind when trying to use this method.

First step – The USB OTG Cable

Get a USB OTG cable or just find a Female USB A to micro USB cable, open the micro USB side and solder pins 4 and 5 of the micro USB port together (this is what turns the USB port into host mode). The photo shows the first version i used. Then i decided to get a nice USB OTG angle cable as you can see in the first photo of the post. If you are interested in one of those, just let me know.

Second step – Console commands

When you have your USB OTG cable, you can proceed to run the commands to load the necessary kernel drivers. The nice part is that everything is already on the PlayBook, so you don’t really need to upload anything. The commands you will need to run are the following:

slay RIM_usbmgr-Winchester
slay io-usb
slay devb-umass
sleep 2
RIM_usbmgr-Winchester -m0s
io-usb -domap4430-mg ioport=0x4a0ab000,irq=124
sleep 2
waitfor /dev/io-usb/io-usb 4
devb-umass cam pnp blk automount=+hd6t6:/accounts/1000/shared/usb:dos,automount=+hd6:/accounts/1000/shared/usb:dos

The only line you really need to pay attention to, is the last one. It shows where the pendrive will be automatically mounted after you connect it. You can specify different mount points for different partitions just separating them by comas (in my example command, hd6t6 and hd6 shown)

The other commands just kill the USB server running and start it with the required commands to be able to run the USB port as a host port. There is also a command to load the kernel driver (io-usb domap….).

Last step – Connect your pendrive

If all went well, you should now be able to connect your pendrive and access contents on the mount folder you selected. Please keep also in mind that you must first create this directory for the automount to work. I also noticed that sometimes the kernel modules does produce a bus error and crashes. If that happens, just try to run all the commands again.

I really expect to be able to improve this method or provide a ready app to execute all the process, but at the current time, this has no ETA. If you want, you can follow me on @guillemmateos and i will tweet any finding or progress I make about this.

If you have any suggestions or are able to get different OS versions working with this method I’d be really happy if you could post it here and let me know.

Thanks!

Tags: , , ,


Dec 12 2011

USB Host support for BlackBerry PlayBook (how to connect a pen drive to your PB)

Category: BlackBerry,Cacharros,Playbookguillem @ 12:40 PM

I’ve been finally able to get USB Host working on the PlayBook so now i can carry with lots more movies or watch the camera images directly on the PB. I posted a demo vídeo to show it working:

I’ll be posting instructions soon on how to do this on your PlayBook, so keep checking here for updates.

UPDATE: Instructions here: playbook USB host – eltecnoblog

Tags: , , , , ,


Apr 15 2011

Developing BlackBerry Playbook apps [part 1]

Category: BlackBerry,Cacharros,Código,Playbookguillem @ 1:29 AM

Continue reading “Developing BlackBerry Playbook apps [part 1]”

Tags: , , , , , ,


Feb 21 2011

BBicing: Bicing App for Blackberry!

Category: BlackBerry,Código,Socialguillem @ 2:33 PM

UPDATE: There is a new version available which works properly again. You’ll find the link at the end of this post :)

After becoming tired of walking through Barcelona searching for bicing stations or trying to park a bike without knowing exactly where to find free places, I decided to create a blackberry app to query the Bicing service in an easy way from my Blackberry.

Having googlemaps and the BBicing application installed should be enough. Then you just need to launch BBicing and it will open googlemaps showing all stations and bike availability using nice icons. If you stay over the icon it will also show you free slots.

This is a ‘pre-alpha’ version if it can be called so, but it works for what i need. I hope it is useful for more people.

You can download it here (it’s completely free! anyway, comments are always nice as are also links to my blog :) ):

BBicing: Bicing app for Blackberry

NOTE: This is an OTA download to open on your Blackberry directly!

Tags: , , ,